Activated Coal Feeder

Feed particle size: 150-500

Processing capacity: 1200-3000

The main body of the HGD activated feeder is organically connected to the top material pile or silo. During operation, the vibration of the arched activator is efficiently transmitted to the top material. The disturbance energy generated by the vibrational force loosens the material, allowing it to fall through the discharge chutes around the feeder to the lower outlet. The activated vibrational force of the feeder, coupled with specially designed peripheral discharge chutes, ensures the free and smooth discharge of material, especially for raw coal, graded coal, and other materials with high pulverized coal content, high moisture, and strong cohesiveness

Applicable materials: pulverized coal and other granular materials

Product Introduction

This machine is suitable for use in silos, coal preparation plants, and open coal storage areas, where it can evenly load coal from the silo onto conveyors or other screening and storage devices. It is particularly suitable for coal mine production in complex and harsh environments, and is insensitive to the harsh underground conditions. Even when dealing with uneven material, unstable and high moisture content in coal, as well as large pieces of gangue and other impurities, it can still operate normally.

Working principle

Utilizing the sub-resonance principle, materials are conveyed vertically with buffering and blanking, preventing silo blockage (utilizing the three-time self-locking of materials to cleverly coordinate arch breaking and silo blockage). The feeding is uniform. By utilizing the sub-resonance of the vibration exciter, it is transmitted to the feeder. After the feeder is vibrated, the materials are fed to the working machine through vibration, achieving vibratory feeding.

Technical Parameters

The main body of the HGD activated feeder is organically connected to the top material pile or silo. During operation, the vibration of the arched activating body is efficiently transmitted to the top material. The disturbance energy generated by the vibrational force loosens the material, allowing it to flow downwards. The material is then transported to the lower outlet through the discharge chutes around the feeder. The activating vibrational force of the feeder, coupled with the specially designed peripheral discharge chutes, ensures the free and smooth discharge of material, especially for raw coal, graded coal, and coal stored outdoors with high pulverized coal content, high moisture, and strong cohesiveness. The angle of the excitation motor can be adjusted according to different material characteristics.

Note: The output may vary depending on factors such as different materials and feed particle size